Author: Christiaan van Gaal

Restoration of Brottsjø 5

Boat building

Click here if you want to read the Introduction/first post.

This week we started taking away the old “skandekk”, that is the construction at the side of the deck that prevents water that’s coming from the deck to leak in-between the ribs and so in parts of the boat that you can’t inspect and thus potentially can cause serious damage. Another important function of the “skandekk” is preventing the deck to get wider and wider, the way we make these decks water tight is by forcing hemp into the different seams between the planks, by doing this you create enormous forces sideways and the ” skandekk” stops these. At this picture you see how I check if the deck is straight or slightly curved. The “randplank” between the straight deck and the curved “skandekk” gets special attention because of its shape.

Continue reading →

Restoration of Brottsjø 4

., Boat building

Click here if you want to read the Introduction/first post.

Because the calculation has to be ready in a couple of weeks I concentrated this week on the “lugar”. The interior is as old as Brottsjø itself so from the thirties, we try to save as mush of the original interior as possible but we have to check the structure underneath like the ribs.

Continue reading →

Restoration of Brottsjø 3

Boat building

Click here if you want to read the Introduction/first post.

Brottsjø in the sliphall. I made fixed points in the slip hall and use these as a reverence for the grid you see here on the boat. The grid can help to position the different parts of the boat later when we start rebuilding the boat. This is one of the new things we use on this project, in the past a reference point sometimes got lost because it was taken away, like a stem.

Continue reading →

Restoration of Brottsjø 2

Boat building

Click here if you want to read the Introduction/first post.

One of the problems with the old electricity, the wiring, switches, sockets and equipment is that we don’t exactly know what we can use later. What are the regulations, is it aloud to use old wires. The goal is to save as much of the original as is allowed so for now it’s finding out the regulations.

Continue reading →

Restoration of Brottsjø

., Boat building

Almost 10 Years ago I worked for the Nordnorsk Fartøyvernsenter og Båtmuseum in Gratangen Norway as a wooden boat builder. There are three of these “fartøyvernsenter”, (boat preservation center) in Norway, two are specialized in restoring wooden boats and one is specialized in steel or iron boats.

I started working in Gratangen in 2006 as a boat builder and in 2010 I was responsible as project manager for the Restoration of Brottsjø together with the help of the other experienced boat builders. Because my Norwegian writing skills were not good enough I started a blog where I wrote in English and kept a relative detailed rapport on what I was doing on a weekly basis.

Continue reading →